Eject Water from Speaker

Are you struggling to remove water from your speaker after an unexpected spill or exposure to moisture? Water can make your speakers sound muffled, distort their audio, and cause rust that shortens their life. Removing water from speakers is crucial because it keeps them working properly and prevents damage.

However, you can eject water from speakers using sound-based software. One such option for you is trying Fix My Speaker. But how to eject water from the speaker using Fix My Speaker?

Well, first visit the Fix My Speaker website. Then set your device’s volume to maximum and activate sound or vibrate mode. After that, wait for the circle to complete and further repeat the process if needed.

In today’s article, we will disclose all the important details about ejecting water from laptop speakers or phone speakers. So, keep going! 

3 Safe Methods to Eject Water from Speakers

In this section, we’ll show you three safe ways to take out water from speaker. These methods are:

1. Using Gravity and Towels

Use gravity and towels to fix your speaker volume after water exposure. Turn off your device and then remove any protective cases. Hold your device with the speaker side facing downwards and gently tap the back to encourage the water to move towards the openings.

Place it on a flat surface with a dry towel underneath. The towel will absorb the moisture, helping to dry out the speaker area without pushing the water deeper inside.

2. The Rice Method

It is well-known that a bowl of rice or white rice can be used as a drying agent for electronic devices. Rice can absorb moisture, which may help dry out your device. To try this rice drying method, fill a container of rice, uncooked rice and bury the speaker part of your device in it.

Leave it there for 24-48 hours. Nonetheless, this method might not fully fix your speaker’s bad sound quality if the water has caused significant damage.

3. Sound-Based Apps to Eject Water

For a more modern approach, consider using high-frequency sound waves-based apps or software designed to eject water from speaker apps. 

These apps use specific high-pitched sound or high-quality sound waves to force water out of the speaker grills. The clearer sound-based app is a good method to eject water from the phone speaker. 

Below we’ll discuss this method in more detail.

How Do You Eject Water from a Speaker Using Sound?

To eject water from the speaker iPhone using sound, follow the easy steps below:

Step 1: Open Fix My Speaker 

First, go to the Fix My Speaker website on your phone or laptop. This software cleans your speakers using sound and its built-in water ejection feature.

If you haven’t installed it yet, make sure you’re online to download it. Once it’s open, quickly get used to the quality water ejection feature for your phone recovery from water.

Step 2: Set Volume to Maximum

Next, increase your phone’s volume to the highest level. High volume is critical because it creates strong vibrations that help eject any trapped visible water or dust damage from your speaker cone.

Ensure your phone isn’t on silent or do not disturb mode to allow the vibrations to work effectively.

Step 3: Activate Sound and Vibrate Mode

Then, turn on the “Sound or Vibrate” option in the app and make sure your phone’s vibration setting is activated. Using both sound and strong air vibration helps to thoroughly dislodge and push out debris from your speakers.

Step 4: Wait for Completion

Allow the app to run until it indicates that the cleaning is 100% complete, which typically takes a few minutes. It’s best to leave your wet phone still during this time to ensure the vibrations can fully reach all parts of the speakers.

Step 5: Inspect and Repeat if Needed

After the first cycle, check your speakers for any remaining water or dust particles. If you still see debris, run the cleaning sound again. You might need to repeat this process several times for heavily clogged speakers.

However, if your phone still has irregular sound or crackling sounds you should repeat the sequence of sound waves to get the quality WAV sounds.

Step 6: Assess the Cleaning

Lastly, evaluate your speakers by playing some audio. If the sound is clear, then your speaker dust is clean. However, if there’s still distortion or muffled sound, you may need to clean them again or seek professional assistance.

What Happens When Speakers Get Wet?

When your speakers get wet, several problems can occur that might affect how they work and how long they last. We’ll discuss what typically happens to wet speakers and the kind of damage they might suffer.

• Sound Quality Degradation: If water gets into your speakers, they might sound muffled and distorted. This happens because the water stops the speaker’s diaphragm from vibrating properly. It is essential for creating low-frequency sound.
• Corrosion of Components: Moisture can cause the metal inside the speakers to corrode over time. This corrosion can damage your speakers permanently, making them less effective and shortening their useful life.
• Electrical Short Circuits: Water conducts electricity, so if it gets inside your speakers, it can cause short circuits. This can harm your speakers’ internal wiring and parts, and water damage might even stop them from working.
• Physical Damage to the Cone: Water droplets can also damage the speaker’s cone, which is usually made from paper or light fabric. It can warp or tear, which affects the speaker’s ability to produce clear sound.

4 Reasons You Should Clean Your Phone Speakers from Water?

Water inside your phone speakers isn’t just annoying—it can harm your device. Here, we’ll explain why you need to remove water from your phone speakers and how it affects your phone’s overall performance.

• Prevents Damage to Speaker Components: Water can cause the metal parts inside your speakers to corrode, leading to irreversible damage. Quickly removing water helps protect these delicate components.
• Maintains Sound Quality: If water remains in your speakers, your sound may become muffled, and the audio quality could diminish. Cleaning out the water ensures that your sound stays crisp.
• Avoids Long-Term Device Issues: Water can spread beyond the speakers and damage other phone parts, potentially causing more serious electrical problems. Dry speakers help keep the rest of your phone safe.
• Enhances Phone Lifespan: Regularly ejecting water from your speakers extends your phone’s life, ensuring it performs longer.

Troubleshooting Common Issues After Water Exposure of Speakers 

After your speakers come into contact with water, you might notice some operational issues. Addressing these issues quickly is crucial to avoid permanent damage.

Now, we’ll review some common problems that arise after water exposure and provide instructions on how to fix them.

Fix  Distorted Audio Quality

When water leaves behind residue in your speakers, it can lead to sound distortion. If your audio sounds crackling or muffled, this could indicate that either water is still present or has already caused some damage.

The initial step is to dry out your speakers thoroughly. If distortion continues, you may need to have them professionally cleaned to remove any lingering deposits that are muddling the sound. You can also try sound-based apps like Fix My Speaker.

Troubleshoot Reduced Speaker Volume

If there’s water inside your speakers, you might notice a drop in volume. This problem often arises because water can block sound pathways.

Try using a sound-based application designed to expel water, as this method can sometimes remove the trapped moisture. Nonetheless, if the volume stays low after you attempt to dry the speaker. There might be more severe internal damage that requires professional attention.

Fix No Sound Output

Experiencing no sound at all from your speakers is a serious issue. It typically indicates significant water damage, possibly even a short circuit in the internal components.

Before you buy new speakers, consider having them checked at a service center. They can open the speakers, dry them out, or fix any internal problems.

Conclusion

To wrap up, addressing water in your speakers promptly and effectively is essential to prevent permanent damage and maintain good sound quality. This guide has shown you several ways to safely remove water, from simple home remedies to using sound-based apps.

The quicker you get the water out using the Fix My Speaker website, the better your chances of keeping your device in good working order. If the problem persists or the damage is severe, it’s best to get professional help to eject water from the speaker.

Frequently Asked Questions

Can I use a hairdryer to dry out my speaker if it gets wet?

No, you can’t use a hair dryer to dry out your wet speaker. Using a hairdryer on a wet speaker can cause harm. Instead, discover safer ways to dry your device without risking additional damage.

What should I do if water doesn’t come out after using an eject water feature or app?

If standard methods don’t work, you should seek professional repair services. Nonetheless, it’s crucial to act quickly to prevent long-term damage.

How often can I safely use sound frequencies to eject water from my speaker?

Using sound-based methods regularly is generally safe, but be cautious not to overdo it to avoid damaging your speaker.